Here are just some of our sizes and products for your reference.
Pure Moly, TZM Moly, MLR Moly, and Ta Sheet and Plate (fully annealed).
We can supply a 24” width of the sheet with a thickness of 0.010” and up.
All of our Mo sheets are as per ASTM B386 standards.
0.005” THK x 12” W x 300” L; 0.010” THK x 24” W x 120” L; 0.015” THK x 24” W x 120” L
0.020” THK x 24” W x 120” L; 0.025” THK x 24” W x 100” L; 0.030” THK x 24” W x 100” L
0.040” THK x 24” W x 100” L; 0.060” THK x 24” W x 72” L; 0.080” THK x 24” W x 72” L
0.100” THK x 24” W x 72” L; 0.250” THK x 24” W x 48” L; 0.312” THK x 24” W x 24” L
0.375” THK x 24” W x 24” L; 0.500” THK x 24” W x 24” L; 0.750” THK x 24” W x 24” L
1.00” THK x 24” W x 24” L
We have other thicknesses, widths, and lengths of our sheets available to better suit any specifications you have.
Pure Moly, TZM Moly, and MLR Moly Rod and Wire (fully annealed, cleaned) as per ASTM B387.
We can offer any length up to 500ft.
1/16” dia x 96” L
3/16” dia x 96” L
1/8” dia x 96” L
3/8” dia x 96” L
5/8” dia x 96” L
1/4” dia x 96” L
3/4” dia x 96” L
1.00” dia x 96” L
1.25” dia x 96” L
1.50” dia x 96” L
1.75” dia x 96” L
Pure Tungsten Rod (Deep Forged, Cleaned)
3/16” dia x 300 inch L
3/8” dia x 300 inch(max) L
5/8” dia x 300 inch(max) L
1/4” dia x 300 inch(max) L
3/4” dia x L
1.00” dia x L
Threaded Moly Rods and Hex Nuts
Moly Threaded Rods:
10-32 x 36”
1/4-20 x 36”
3/8-16 x 36”
Moly Hex Nuts:
10 – 32
1/4 – 20
3/8 – 16
Tungsten Sheets and Plates
0.010” x 12” x 40”,
0.015” x 12” x 40”,
0.020” x 12” x 40”,
0.025” x 12” x 40”,
0.030” x 12” x 40”,
0.040” x 12” x 40”,
0.060” x 12” x 40”,
0.1875” x 12” x 36”,
0.500” x 12” x 24”,
Molybdenum Boats for MIM, PM–We supply plenty of molybdenum trays/boats to US and Europe powder sintering factories. The material is Lan-Moly, TZM Moly, or Pure Moly. We supply non-welded, non-riveted trays.
Here are some of the sizes we can supply.
3/16” THK x 12” W x 12” L of Lan-Moly
1/4” THK x 12” W x 12” L tray
0.125” THK x 7.50” W x 12” L x 0.75” H Tray
0.125” THK x 6.00” W x 18.70” L x 1.75” H Lan-Moly
0.125” THK x 13” W x 13” L x 3.15” H, Lan-Moly
Besides supplying sheets, rods, and wires, we also fabricate Mo/W/Ta/Nb parts according to your drawings including hot zones, heat shields, screws, nuts, trays, molybdenum retorts, grid elements, sintering boats, filaments, charge carriers, shelves, targets, hangers, and heating elements.
